Best Hadco out of top 19

 

Hadco Philips Led Inground Low Voltage Landscape Light Bronze

Hadco Philips Led Inground Low Voltage Landscape Light; Bronze

Hadco Philips Led Inground Low Voltage Landscape Light; Bronze - Input voltage range (vac) 108, 175 input frequency 60hz (magnetic low voltage transformer required) integral surge protector built into led driver circuit 12 volts, 124 total watts consumed (high power) or 5 total watts consumed (low power). Led. Warm 3000k. Medium optics. Bronze finish.

 

Hadco Lighting B3-h B3 Aluminum Bullyte Line Voltage Accent Bronze 100w Parr30

Hadco Lighting B3-h B3 Aluminum Bullyte Line Voltage Accent Bronze 100w Par/r30

Hadco Lighting B3-h B3 Aluminum Bullyte Line Voltage Accent Bronze 100w Par/r30 - Bronze. 100w par/r30.

 

Hadco Lighting BU4-H BU4 100W Par38 Composite Bullyte Line Voltage Bronze

Hadco Lighting BU4-H BU4 100W Par38 Composite Bullyte Line Voltage Bronze

Hadco Lighting BU4-H BU4 100W Par38 Composite Bullyte Line Voltage Bronze - Finish composite is textured, pressure formed, molded-in-color. Weight 3. Lower wattage lamps are acceptable. Lens is siliconed into shroud. One-piece injection molded ultem high performance polymer composite. Cetl listed to canadian safety standards for wet locations. Certifications etl listed to u. Fasteners are 300 series stainless steel. Nickel-plated screw shell with center contact. 75 lb. Lamping 100w maximum par30/r30 or par38/r40 medium base lamp. 100w maximum mh medium base e17 100w maximum mh medium base par38 lamp is not included. Electrical assembly 4kv rated porcelain mini-can base. Safety standards for wet locations.  Housing fully rotatable shroud, gasketed, ultem high performance polymer composite. Width 6 1/4″ (159mm) length 16 1/2″ (419mm) max. ” Nps male threads to screw onto accessory mounting stake or junction box, sold separately. Warranty ten-year limited warranty. Shroud is optional. Hid par30 mh or mv acceptable with remote ballast (not included). Manufactured to iso 90012008 standards. Bun4, buw4, shroud included. Fully-adjustable swivel arm with vibration-proof locking teeth. S. Ballast must order inground (ibh) or above ground (abh) ballast housing separately. Gasketing is silicone. Bu4, shroud optional. Optical assembly one-piece injection molded ultem high performance polymer with silicone o-ring gasket.

 

HADCO - BL616-HS7BAB - HADCO Micro Bullyte wStake Lamp

HADCO – BL616-HS7BAB – HADCO Micro Bullyte w/Stake, Lamp

HADCO – BL616-HS7BAB – HADCO Micro Bullyte w/Stake, Lamp - Low voltage small aluminum bullytewith long shroudlamp type mr16socket base bi-pinwith s7 mounting stakewith bab 20w mr16width 3″length 5 1/2″finish bronze.

 

Hadco Lighting GAHL1-AC GAHL1 Copper Downlyte Low Voltage Accent Copper Finish 12V

Hadco Lighting GAHL1-AC GAHL1 Copper Downlyte Low Voltage Accent Copper Finish 12V

Hadco Lighting GAHL1-AC GAHL1 Copper Downlyte Low Voltage Accent Copper Finish 12V - – copper, gahl1-ac, sm hanging downlyte, gahl1-ac. Width/diameter 3. 75″, height 5″, , ul suitable for wet locations, desc the supply cable.

 

Hadco Lighting B1-a B1 Small Aluminum Bullyte Black Without Shroud 100w Parr20

Hadco Lighting B1-a B1 Small Aluminum Bullyte Black Without Shroud 100w Par/r20

Hadco Lighting B1-a B1 Small Aluminum Bullyte Black Without Shroud 100w Par/r20 - Black without shroud. 100w par/r20.

 

Hadco Lighting 150 Watt 12 Volt Transformer With Built In Timer and Photoeye-TC152-12TP

Hadco Lighting 150 Watt 12 Volt Transformer With Built In Timer and Photoeye-TC152-12TP

Hadco Lighting 150 Watt 12 Volt Transformer With Built In Timer and Photoeye-TC152-12TP - 6-ft heavy-duty 18-3 awg, 105° c, sjt power cord with 3 prong grounded wall plug. Insulation type transformers for safe operation. Voltage control switch low = 11. 5v, high = 12. Electrical assembly the transformer is thermally protected and is shielded between the 120v input and the low voltage output, for safety. Consult factory for details. S. 5v. Cetl listed to canadian safety standards for wet locations. Internal transformer is epoxy encapsulated. Housing housing and cover are polyester powdercoated steel with removable door. 50/60hz input. 9amp. Cable entries should be positioned downward. Includes integral timer and photocell. Certifications etl listed to u. Manufactured to iso 90012008 standards. Safety standards for wet locations. Exterior mounting, transformer should be mounted on the wall, structure, or post in the vertical position. Euro-board terminal block for easy low voltage cable attachment. Line voltage amperage draw 150va =.

 

Hadco Lighting Mu5_g Mu5 Medium Mushroom Pathlyte 120v Verde Green

Hadco Lighting Mu5_g Mu5 Medium Mushroom Pathlyte 120v Verde Green

Hadco Lighting Mu5_g Mu5 Medium Mushroom Pathlyte 120v Verde Green - Verde green.

 

Hadco - Isl16 - Spread Lens

Hadco – Isl16 – Spread Lens

Hadco – Isl16 – Spread Lens - Spread lensfits over lamp inside housingclips onto an mr16 lamp inside the fixturediameter 2″used with bl1, bl16, bl5016, bt1, bt5016, bul1, bul16, i2, il116, it216, iul516.

 

HADCO LVC3 Low Voltage Connector

HADCO LVC3 Low Voltage Connector

HADCO LVC3 Low Voltage Connector - Low voltage cable connector to be used with (1) 10 or (1) 12 gauge supply cable and (1) 18 gauge fixture cable. ½” Nps male threads to screw onto accessory mounting stake and junction box sold seperately. Natural copper is bright polished, untreated copper. Fixture sold seperately shade only 4″ wide. Spun solid copper roof with copper stem machined brass threaded adapter for tool-less relamping.

 

Hadco Lighting BU3-A BU3 Composite Bullyte Line Voltage Accent Black 75W PAR30

Hadco Lighting BU3-A BU3 Composite Bullyte Line Voltage Accent Black 75W PAR30

Hadco Lighting BU3-A BU3 Composite Bullyte Line Voltage Accent Black 75W PAR30 - A porcelain base socket ensures electrical insulation and safety, even in wet conditions. The bu3 composite bullyte line voltage accent from hadco lighting are accent lights available in verde, black and bronze finishes with a lamp capacity of up to 75 watts. With a length of 241 mm, the bu3 composite allows for ballast to be either in-ground or above ground. Hadco philips is the preferred lighting brand for residential, commercial, landscape and municipal users and the bu3 composite bullyte accent proves why. The light assembly is housed in a polymer composite shroud and is capable of complete 360o horizontal and vertical rotation to give complete operational freedom when focusing the lights. . Light from the lamp is dispersed through a clear tempered glass placed at an angle of 10o to facilitate easy cleaning.

 

Hadco Lighting BUL16-HS7 BUL16S7 12 Volt Micro Ultem Bullyte with Stake Bronze Lamp Type Not Included

Hadco Lighting BUL16-HS7 BUL16S7 12 Volt Micro Ultem Bullyte with Stake Bronze Lamp Type Not Included

Hadco Lighting BUL16-HS7 BUL16S7 12 Volt Micro Ultem Bullyte with Stake Bronze Lamp Type Not Included - 20w mr16 shipped if ordered optical assembly clear tempered glass affixed at 10 angle for natural cleaning. Covered mr16 are recommended to protect lamps inner capsule. Finish composite is textured, pressure formed, molded-in-color. Cetl listed to canadian safety standards for wet locations. Low voltage quick connector, catalog #lvc3 included for easy hook-up to the low voltage supply cable, not included. Electrical assembly bi-pin socket type (gu5. 16 lb. 3) with 250 c high temperature teflon coated wire leads. Stainless steel retention clip affixed to socket to securely hold lamp in place. Electrical internal connectors are stainless steel 12 volt fixture is pre-wired with 3-ft pigtail of 18-2 awg, 105 c, spt-1w wire. Fasteners are 300 series stainless steel. The wires are permanently fused to the clip. Width 2 1/8″ (80mm) length 6 1/2″ (165mm) max. Manufactured to iso 90012008 standards. 12 volt system requires remote transformer, not included. Fully-adjustable swivel arm with vibration-proof locking teeth” nps male threads to screw onto accessory mounting stake (included) or junction box (sold separately). Safety standards for wet locations.   Housing one-piece injection molded ultem high performance polymer composite. Lamping 35w maximum mr16 bi-pin lamp. Mounting s7 mounting stake warranty ten-year limited warranty. Gasketing is silicone. Fully rotatable shroud, gasketed, ultem high performance polymer composite. Certifications etl listed to u. Weight 1. Stainless steel lamp clip is designed to prevent arching of bi-pin and also acts as a heat sync to keep heat away from the socket. Lower wattage lamps are acceptable. S.

 

Hadco Lighting MUL4_AS7 MUL4 Small Mushroom Pathlyte Low Voltage Black

Hadco Lighting MUL4_AS7 MUL4 Small Mushroom Pathlyte Low Voltage Black

Hadco Lighting MUL4_AS7 MUL4 Small Mushroom Pathlyte Low Voltage Black - Hadco lighting offers these path lighting fixtures in a variety of finishes — speckled stone, brass, bronze, verde, sienna, black and natural cast bronze. The mul4 small mushroom low voltage pathlyte from hadco lighting has a stem which is about 19. The mul4 mushroom is a path light mostly installed outdoors, hence the roof is made from stainless steel to protect it from the elements. A powder coated finish further protects the fixture from losing its luster due to rain or sun. The mul4 pathlyte assembly runs on the lower voltage of 12 v and is safety-certified for use in wet locations. A spun aluminium reflector amply reflects the downcast light of the 20 watts lamp. . 5â€ù long and a dome 5 1/16â€ù in diameter.

 

Hadco Lighting Bl1-hls7 Bl1 Small Aluminum Bullyte Low Voltage With Stake Bronze Long Shroud

Hadco Lighting Bl1-hls7 Bl1 Small Aluminum Bullyte Low Voltage With Stake Bronze Long Shroud

Hadco Lighting Bl1-hls7 Bl1 Small Aluminum Bullyte Low Voltage With Stake Bronze Long Shroud - Long shroud. Bronze.

 

Hadco Lighting 30&quot Aluminum Bollard 120 Volt Bronze Db30-h

Hadco Lighting 30" Aluminum Bollard 120 Volt Bronze Db30-h

Hadco Lighting 30" Aluminum Bollard 120 Volt Bronze Db30-h - Lamping incandescent medium base a19 (100 watt max). Anchor rods internal (3) 3/8″ dia x 8″ long (1 cm x 20cm).

 

HADCO BULLYTE LED - Verde with Stake 4000K CCT

HADCO BULLYTE LED – Verde with Stake 4000K CCT

HADCO BULLYTE LED – Verde with Stake 4000K CCT - 7w lamp with 15°, 24°, or 36° beam spread. 25,000 hours life. Safety standards for wet locations. Manufactured to iso 90012008 standards. No mercury. Stainless steel retention clip affixed to socket to securely hold lamp in place. 24° beam angle for a clearly defined beam spread. No mercury. 12 volt fixture is pre-wired with 3-ft pigtail of 18-2 awg, 105° c, spt-1w wire. Fully rotatable shroud, double gasketed, die-cast marine grade alloy aluminum. Specifications housing die-cast marine grade aluminum alloy. Features active cooling technology to disperse heat. No uv and cool beam (no ir). Weight 1. 20,000+ hours rated life. ½” Nps male threads to screw onto accessory mounting stake or junction box, sold separately. S. Fasteners are 300 series stainless steel. Low voltage quick connector, catalog #lvc3 included for easy hook-up to the low voltage supply cable, not included. 48 lb. Optical assembly clear tempered glass affixed at 10° angle for natural cleaning. 12 volt system requires remote transformer, not included. Cetl listed to canadian safety standards for wet locations. Fully-adjustable swivel arm with vibration-proof locking teeth. Finish thermoset polyester powdercoat is electrostatically applied after a five-stage conversion cleaning process and bonded by heat fusion thermosetting. Color temperature (cct) warm white (2,700k nominal). 25,000 hours life. Lamping 4w lamp with 24° beam spread. Instant-on light. Color temperature (cct) cool white (4,000k nominal) or warm white (2,700k nominal). 3) with 250° c high temperature teflon coated wire leads. Electrical assembly bi-pin socket type (gu5. Emits virtually no uv/ir light beam. Certifications etl listed to u. Gasketing is silicone. Width 2 13/16″ (71mm) length 5 13/16″ (147 mm) max.

 

Hadco Lighting 300 Watt Stainless Steel Multi-tap 12-15 Volt Transformer

Hadco Lighting 300 Watt Stainless Steel Multi-tap 12-15 Volt Transformer

Hadco Lighting 300 Watt Stainless Steel Multi-tap 12-15 Volt Transformer - Housing is 304 brushed stainless steel case with stainless steel screws and lockable captive door, hinged on side weather-proof compartment for plug-in time clock and photo cell. 12, 13, 14, and 15 volt output taps for design flexibility and longer cable run capability. Lifetime limited warranty. 6-ft heavy-duty 18-3 awg, 105° c, sjt power cord with 3 prong grounded wall plug. The transformer is thermally protected on primary, and secondary side is protected by circuit breaker.

 

Hadco Lighting DWCL1_A DWCL1-A Composite Mini Beacon Black 12V 12V

Hadco Lighting DWCL1_A DWCL1-A Composite Mini Beacon Black 12V 12V

Hadco Lighting DWCL1_A DWCL1-A Composite Mini Beacon Black 12V 12V - Note watertight connectors and potting compound (by others) must be used to maintain a watertight seal at conduit entry points. Warranty ten-year limited warranty.  Housing single-piece compression molded fiberglass reinforced polyester composite, factory pressure tested to ensure water will not wick or leak through. 5 lb. Lamping 20w maximum t3 bi-pin lamp. Finish composite is textured, pressure formed, molded-in-color. Weight 2. Cetl listed to canadian safety standards for wet locations. 12 volt fixture is pre-wired with 3-ft pigtail of 18-2 awg, 105° c, spt-1w wire. Single-piece molded silicone gasket to prevent water, dust, and insect filtration. Manufactured to iso 90012008 standards. Height 8 3/4″ (222mm) width 5″ (127mm) max. Electrical assembly bi-pin socket type (g4) with 250°c high temperature teflon coated wire leads. Fasteners are 300 series stainless steel. Low voltage quick connector, catalog #lvc3 included for easy hook-up to the low voltage supply cable, not included. Safety standards for wet locations. Lamp is included with fixture. S. Two (2) conduit inlets at bottom. Certifications etl listed to u. 12 volt system requires remote transformer, not included. Lower wattage lamps are acceptable. Optical assembly frosted borosilicate glass.

 

Hadco Lighting Cul7d Medium Led Pathlyte 12v Stake Included

Hadco Lighting Cul7d Medium Led Pathlyte 12v, Stake Included

Hadco Lighting Cul7d Medium Led Pathlyte 12v, Stake Included - Specifications housing spun solid copper roof rolled under for strength with copper stem. The cul7 features a spun solid copper roof and copper stem that will enhance any landscape and endure the elements for night beauty. Machined copper threaded adapt.