21 Best Irrigation Fittings

 

10 Pack 12&quot Barbed Tee T Fitting For Irrigation Hydroponics Drip Systems

10 Pack 1/2" Barbed Tee T Fitting For Irrigation Hydroponics Drip Systems

10 Pack 1/2" Barbed Tee T Fitting For Irrigation Hydroponics Drip Systems - Durable. 1/2″.

 

DIG Corporation 12 compression hose end drip irrigation fitting 620 OD Bag of 25

DIG Corporation 1/2″ compression hose end, drip irrigation fitting .620 OD, Bag of 25

DIG Corporation 1/2″ compression hose end, drip irrigation fitting .620 OD, Bag of 25 - Operating pressure 10 to 30 psi. High impact plastic. Secure and easy installation without glues or clamps. Uv-resistant. Color coded.

 

Rain Bird Bc2510ps Drip Irrigation 14&quot Barbed Coupling Fitting 10-pack

Rain Bird Bc25/10ps Drip Irrigation 1/4" Barbed Coupling Fitting, 10-pack

Rain Bird Bc25/10ps Drip Irrigation 1/4" Barbed Coupling Fitting, 10-pack - Pack of 10 couplings. Barbed end can also be inserted directly into the side of 1/2″ or larger drip distribution tubing. Allows creation of a custom layout for your planting area. 0-50 psi pressure rating. Connector for use with 1/4″ drip irrigation tubing.

 

Drip Tape Fittings - Connector - Drip Line to Mainline - Irrigation - 400B-06-LSO - QTY 50

Drip Tape Fittings – Connector – Drip Line to Mainline – Irrigation – 400B-06-LSO – QTY 50

Drip Tape Fittings – Connector – Drip Line to Mainline – Irrigation – 400B-06-LSO – QTY 50 - Made of high quality material. Re-use year after year. You are purchasing 50 drip tape fitting for mainline irrigation. Orange color makes it easy to fine at the end of the season. Use this 400 barb to tape fitting with 3/4″ or larger poly tubing.

 

Perma-Loc Tape x MHT End Cap Flush Valve Drip Irrigation Fitting

Perma-Loc Tape x MHT End Cap Flush Valve Drip Irrigation Fitting

Perma-Loc Tape x MHT End Cap Flush Valve Drip Irrigation Fitting - 100% satisfaction guarantee. Same day shipping (m-f to 5pm est). Excellent customer service. 30 day no question asked returns. Lifetime warranty on products.

 

Agricultural Brass 12 Misting Spray Sprinkler Nozzle 4 Hole Irrigation Fitting Hose Connector

Agricultural Brass 1/2″ Misting Spray Sprinkler Nozzle 4 Hole Irrigation Fitting Hose Connector

Agricultural Brass 1/2″ Misting Spray Sprinkler Nozzle 4 Hole Irrigation Fitting Hose Connector - 65″”(l x w) weight63g package include 1 x misting nozzle. 0kg traffic 150-200l / h spray range 2 meters dimension60 x 42mm/2. 36 x 1. Colorgolden materialbrass model 1/2″” media water installation external thread connection working temperature room temperature working pressure atmospheric pressure working pressure 2. 0-4.

 

10 Pack 12&quot Barbed Plug Fitting For Irrigation Hydroponics Garden Drip Systems

10 Pack 1/2" Barbed Plug Fitting For Irrigation Hydroponics Garden Drip Systems

10 Pack 1/2" Barbed Plug Fitting For Irrigation Hydroponics Garden Drip Systems - Durable. 10 pack. 1/2″.

 

OPPOHERE 4 Hole Brass Spray Misting Nozzle Garden Sprinklers Irrigation Fitting New

OPPOHERE 4 Hole Brass Spray Misting Nozzle Garden Sprinklers Irrigation Fitting New

OPPOHERE 4 Hole Brass Spray Misting Nozzle Garden Sprinklers Irrigation Fitting New - Packed safely in bubble bag. 5) large area of spraying pesticide the products can be used for large area of spray and reduce the temperature quickly. Specification material copper nozzle outer diameter18 mm total height 45 mm the nozzle hole diameter 1. Metric connection size of two joint(m14x1. 0 mm connection internal thread package included 1 x spray nozzle no retail box. Description brand new and high quality.

 

Rain Bird Be25-10s Drip Irrigation 14&quot Barbed Elbow Fitting 10-pack

Rain Bird Be25-10s Drip Irrigation 1/4" Barbed Elbow Fitting, 10-pack

Rain Bird Be25-10s Drip Irrigation 1/4" Barbed Elbow Fitting, 10-pack - Barbed end can also be inserted directly into the side of 1/2″ or larger drip distribution tubing. Pack of 10 elbows. 0-50 psi pressure rating. Allows creation of a custom layout for your planting area. Connector for use with 1/4″ drip irrigation tubing.

 

Windspeed 4 Hole Brass Spray Nozzle 12  Garden Sprinklers Irrigation Fitting Water Connector Pack of 3

Windspeed 4 Hole Brass Spray Nozzle, 12 ” Garden Sprinklers Irrigation Fitting Water Connector, Pack of 3

Windspeed 4 Hole Brass Spray Nozzle, 12 ” Garden Sprinklers Irrigation Fitting Water Connector, Pack of 3 - Metric connection size of two joint(m14x15) large area of spraying pesticide. Made with high grade brass which is lightweight and is engineered to last long. These are actually 1/4″ pipe thread if you want to screw it into 1/2″ pvc, you’ll need to adapt this 1/4″ fitting to 1/2″ fitting to go into your preferred pvc fitting. Multi-use widely used in landscape gardening, balcony, garden sprinkler watering villas and other occasions. Nozzle outer diameter18 mm total height 45 mm.

 

KINGSO 4 Hole Brass Spray Nozzle Garden Sprinklers Irrigation Fitting Cooling System

KINGSO 4 Hole Brass Spray Nozzle Garden Sprinklers Irrigation Fitting Cooling System

KINGSO 4 Hole Brass Spray Nozzle Garden Sprinklers Irrigation Fitting Cooling System - Excellent customer service. 100% satisfaction guarantee. 30 day no question asked returns. Brand new and high quality metric connection size of two joint(m14x1 5) large area of spraying pesticide the products can be used for large area of spray and reduce the temperature quickly features weight65g size32mm materialcopper nozzle outer diameter18 mm total height38 mm the nozzle hole diameter10 mm connectioninternal thread package included 1 x spray nozzle notice 1please allow 1-3mm error due to manual measurement,please make sure you do not mind before you bid 2the colors may have different as the difference display,please understand. Lifetime warranty on products.

 

Hunter Sprinkler PLDCAP Micro Irrigation Fitting Barb to End Cap

Hunter Sprinkler PLDCAP Micro Irrigation Fitting Barb to End Cap

Hunter Sprinkler PLDCAP Micro Irrigation Fitting Barb to End Cap - What sets hunter pld apart is its pressure compensation system with a built-in check valve that helps prevent emitter clogging and water loss, as well as ensuring even flows on all terrains and lateral lengths. Hunter pld applies water slowly and evenly for consistent distribution. Water soaks in gradually, easily reaching its intended goal. .

 

4 Hole Brass Spray Nozzle Garden Sprinklers Irrigation Fitting Cooling System

4 Hole Brass Spray Nozzle Garden Sprinklers Irrigation Fitting Cooling System

4 Hole Brass Spray Nozzle Garden Sprinklers Irrigation Fitting Cooling System - Please allow 1-3mm error due to manual measurement,please make sure you do not mind before you bid. The products can be used for large area of spray and reduce the temperature quickly. Metric connection size of two joint(m14x1 5). Large area of spraying pesticide. The colors may have different as the difference display,please understand.

 

DIG Corporation 12 compression tee drip irrigation fitting 620 OD Bag of 25

DIG Corporation 1/2″ compression tee, drip irrigation fitting .620 OD, Bag of 25

DIG Corporation 1/2″ compression tee, drip irrigation fitting .620 OD, Bag of 25 - Secure and easy installation without glues or clamps. Color coded. High impact plastic. Operating pressure 10 to 30 psi. Uv-resistant.

 

Perma-loc 12&quot Tubing X 34&quot Fht W Swivel Irrigation Fitting- 5 Pack

Perma-loc 1/2" Tubing X 3/4" Fht W/ Swivel Irrigation Fitting- 5 Pack

Perma-loc 1/2" Tubing X 3/4" Fht W/ Swivel Irrigation Fitting- 5 Pack - Pack of 5 individual units. 100% satisfaction guarantee. 30 day no question asked returns. Lifetime warranty on products. Same day shipping (m-f to 5pm est).

 

Hunter Sprinkler PLD050 Micro Irrigation Fitting Barb to 12-Inch MPT Adapter

Hunter Sprinkler PLD050 Micro Irrigation Fitting Barb to 1/2-Inch MPT Adapter

Hunter Sprinkler PLD050 Micro Irrigation Fitting Barb to 1/2-Inch MPT Adapter - What sets hunter pld apart is its pressure compensation system with a built-in check valve that helps prevent emitter clogging and water loss, as well as ensuring even flows on all terrains and lateral lengths. Hunter pld applies water slowly and evenly for consistent distribution. Water soaks in gradually, easily reaching its intended goal.

 

DIG Corporation 12 compression tee drip irrigation fitting 700 OD Bag of 25

DIG Corporation 1/2″ compression tee, drip irrigation fitting .700 OD, Bag of 25

DIG Corporation 1/2″ compression tee, drip irrigation fitting .700 OD, Bag of 25 - Uv-resistant. Color coded. Operating pressure 10 to 30 psi. Secure and easy installation without glues or clamps. High impact plastic.

 

Orbit 12&quot Universal End Cap Fitting For Drip Irrigation Tube 620-710

Orbit 1/2" Universal End Cap Fitting For Drip Irrigation Tube (.620-.710)

Orbit 1/2" Universal End Cap Fitting For Drip Irrigation Tube (.620-.710) - Plastic.

 

2 Pack 10 total pieces Orbit Figure 8 End Fitting for 12 Drip Irrigation Tubing - 5 pack

2 Pack (10 total pieces) Orbit Figure 8 End Fitting for 1/2″ Drip Irrigation Tubing – 5 pack

2 Pack (10 total pieces) Orbit Figure 8 End Fitting for 1/2″ Drip Irrigation Tubing – 5 pack - It is easy to install and is used for closing off the ends of ½-inch irrigation drip tubing. Features and benefitscomes in a pack of 5easy to install on drip irrigation tubingeasily removes for winterization of dripping irrigation systemscloses off ends of ½-inch sprinkler drip line. Ideal for lawn and garden professionals as well as do-it-yourselfers, this 5-pack of drip tubing fittings is great drip watering equipment to have around. These irrigation tube fittings remove easily for drip sprinkler system winterization and to flush your drip watering system. This figure 8 drip tube fitting comes in a pack of 5.

 

Hunter Sprinkler PLDCPL Micro Irrigation Fitting Barb to Barb Coupling

Hunter Sprinkler PLDCPL Micro Irrigation Fitting Barb to Barb Coupling

Hunter Sprinkler PLDCPL Micro Irrigation Fitting Barb to Barb Coupling - Hunter pld applies water slowly and evenly for consistent distribution. What sets hunter pld apart is its pressure compensation system with a built-in check valve that helps prevent emitter clogging and water loss, as well as ensuring even flows on all terrains and lateral lengths. Water soaks in gradually, easily reaching its intended goal.

 

Dig Corporation 12&quot Compression Coupling Drip Irrigation Fitting 700 Od Bag Of 25

Dig Corporation 1/2" Compression Coupling, Drip Irrigation Fitting .700 Od, Bag Of 25

Dig Corporation 1/2" Compression Coupling, Drip Irrigation Fitting .700 Od, Bag Of 25 - Secure and easy installation without glues or clamps. Uv-resistant. Operating pressure 10 to 30 psi. High impact plastic. Color coded.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.